Blog

NZ Pump - MBSP55 Adaptor Fitting

11 January 2018
Ezi-action MBSP55 Adaptor

NEW Ezi-action® MBSP55 Fitting

The Ezi-action® MBSP55 can be used to secure the Ezi-action® Drumpump into either a metal drum with British Standard fine thread (58mm outside diameter of bung) opening or into a plastic drum with 56 x 4 buttress opening.

The 200 litre drums manufactured in New Zealand by Alto have both these thread openings so the Ezi-action®  MBSP55 Adaptor Fitting will fit both sides of an Alto drum.

The Ezi-action® MBSP55, like all Ezi-action® M Fittings, is a three-part construction with locking nut, which can easily be loosened by hand and the locking ring which grips the Ezi-action® Drumpump shaft when hand tightened, assures security and leak free operation.

The Ezi-action® Drumpumps are the hand pump of choice around the world when dispensing from bulk containers and the addition of the Ezi-action® MBSP55 Adaptor Fitting is a welcome solution to the problem of different thread openings on drums.

The combination of two threads on one fitting simplifies the transfer of the Ezi-action® Drumpump between different drums.

The Ezi-action® M Fittings required in New Zealand and Australia are MBSP55, M63 and M69. The thread requirement can vary with the country of origin of the drum.

 

 

 

 

 

 

Ezi-action® Drumpumps will dispense from drums containing the harshest chemicals including cleaning chemicals, sanitisers, disinfectants, oils, lubricants, or liquid foods, and many more.

 

Learn More about the range of Ezi-action® Adaptor Fittings.

Read Another Blog

 

 

 

View Sitemap

Back to Top