Is customising the Ezi-action® Drum Pump with a hose something you want to do?
The Ezi-action® Drum Pump will siphon when a long hose is fitted and the source of the fluid is higher in elevation than the receptacle.
If you do not want to risk unintentional siphoning insert an Ezi-action® Non-Siphon Check Valve into your hose.
The Ezi-action® Non-Siphon Check Valve permits air to enter the hose and effectively breaks the siphon.
The Ezi-action® Non-Siphon Check Valve is constructed from polypropylene with a viton seal.
The Ezi-action® Non-Siphon Check Valve Kit is provided with diagrammatic instructions.
Do you want us to supply the hose?
We offer 0.5m/19" x 19mm/3/4", 0.8m/33" x 19mm/ 3/4" ID clear PVC tubing.
We currently have available limited stock of 3m X 19mm ID opaque PVC tubing.
We can supply hose fitted with a Ezi-action® Non-Siphon Check Valve.
Do you want to place a trigger sprayer on the Ezi-action® Safety Measure?
Our Ezi-action® conversion fitting will secure a trigger sprayer to the Ezi-action® Safety Measure bottle.
Consider the benefits
Do you use a 20mmOD Pick-up Lance connected to an electric pump to draw up the contents of a 200 litre drum?
Do you want a secure fitting that will eleminate the risk of contamination of the drum contents?
Our Ezi-action® 20mm Adaptor Fitting will secure a 20mm OD pick-up lance into a drum.
Suitable for all Ezi-action® M fittings.
The LDPE washer and scraper seals are also available by themselves as a Seal Pack with easy to follow instructions.
The Ezi-action® Seal Pack contains a more sophisticated plastic washer seal and scraper seal than our standard LDPE.
This sophisticated plastic has greater memory and better resistance with certain chemicals.
Where a customer needs to replace the LDPE seals often our Ezi-action® Seal Pack can reduce the frequency of LDPE seal replacement.
The improved memory can also be an advantage when pumping a large volume rather than dispensing a small amount of fluid.
The Ezi-action® Safety Measure Spout not only secures
the Ezi-action® Safety Measure to the Ezi-action® Drum Pump
but can also be used as a Splash Guard when filling 28mm bottles.
The Ezi-action® Splash Guard Spout can be supplied separately
or fitted to the Ezi-action® Drum Pump.
Are you wanting to drench animals with 160ml per dose or more?
A stomach drench system is available that will fit the Ezi-action® Drum Pumps.