There is an Ezi-action® Adaptor Fitting to secure and lock the drum pump into every common thread configuration for bulk containers with at least a 42mm wide opening.
The Ezi-action® M fittings required in NZ and Australia are MBSP55, M63 and M69.
The thread requirement can change depending on the origin of the drum.
We have a solution from varying the size of an O ring to customising a specific fitting.
We are pleased to work with you to ensure you get the best fitting to secure your Ezi-action® Drumpump into your drum, barrel, jerry can, container or IBC.
If you’d like to work with our sales team in your area then please Contact Us and click on your location on the world map.
a. Measure across the opening internal thread width.
b. Measure the width of the bung.
Both these drums require an Ezi-action® M55 fitting.
a. Measure across the opening outside thread width.
b. Examine the thread pitch.
Note: The IBC needs a small inner cap within a large cap. ( see photo)
a. Remove the small inner cap.
b. Measure the internal opening and examine the thread.
If the opening has width of 58mm with a fine thread the IBC requires an Ezi-action® MBSP Adaptor Fitting.
If the opening has width of 55mm with a medium thread the IBC requires an Ezi-action® M55 Adaptor Fitting.
The most commonly required fittings for IBC's are the Ezi-action® MBSP and M55 adaptor fitting.